2019 WOLVERINE X4 EPS

$PLEASE CALL

ENGINE

  • Rubber mounted, compact, 847 cc, liquid-cooled, DOHC, 8-valve (4-valves / cyl), inline twin cylinder engine with Yamaha’s Chip Controlled Throttle (YCC-T) provides lots of torque across the rev range with linear throttle response.
    • compact engine design allows it to be placed in the centre of the chassis allowing a shorter wheelbase for excellent off road capabilities
    • engine is designed to provide smooth, quiet operation for maximum enjoyment
    • 4-point rubber engine mounts reduce vibration
  • 4-valve, downdraft style combustion chamber with 10.5:1 compression ratio.
    • 4-valve design maximizes flow into & out of combustion chamber
    • 31.5 mm intake & 26.5 mm exhaust valves
    • stainless steel valves feature an Isonite surface treatment & carburized tips for excellent durability & wear resistance
  • Lightweight hollow camshafts.
    • cam profiles are designed to accentuate torque & power throughout the rev range
    • automatic cam chain tensioner reduces both mechanical engine noise & maintenance
  • “Cross Plane Concept” 270 degree crankshaft.
    • design reduces inertia torque while emphasizing linear torque
    • design has been optimized to achieve strong torque over a broad rpm range
    • CP Concept offers excellent “drive-ability” and linear throttle response
  • Lightweight gear driven balancer shaft.
    • reduces engine vibration for excellent rider / passenger comfort
    • reduced vibration also improves engine durability
  • Forged connecting rods feature a “nut less” design.
    • rods are heat treated for excellent durability
  • Lightweight, concaved forged aluminum short skirt pistons.
    • design aids in fast engine response & reduced mechanical vibration
    • excellent durability
  • “Liner less” bores with direct nickel ceramic plating sprayed directly on the aluminum block.
    • design eliminates the need for liners / sleeves & reduces weight
    • excellent heat dissipation & durability for consistent power delivery
    • cylinder block is incorporated into the upper engine case to reduce weight
  • Offset cylinder design.
    • cylinder is “offset” relative to the crank (toward exhaust side)
    • offset design reduces the side load (friction) on the pistons during the power stroke for improved power output & excellent fuel economy
  • Dry sump lubrication system with heat exchanger type oil cooler.
    • oil tank baffling system prevents oil starvation in rugged /difficult off road environments
    • dry sump oil system reduces engine height for a lower centre of gravity (no deep design oil pan)
    • heat exchanger type oil cooler maintains consistent oil temperatures for improved durability
    • spin-on type oil filter for fast oil changes
  • Yamaha Chip Control Throttle (YCC-T) system (a.k.a. “fly by wire throttle”).
    • YCC-T electronically controls the throttle valves for outstanding throttle response
    • YCC-T provides precise control of intake air volume for a smoother torque curve
  • “Closed loop” dual 36 mm Mikuni throttle body fuel injection.
    • system uses a throttle position sensor (TPS) for optimum performance (TPS is linked to the ECU & ignition mapping)
    • 12 hole injectors for optimum fuel atomization
    • system is “tuned” to provide excellent “drive-ability” & “linear” throttle control
    • fuel injection benefits include choke-free starting, steady idling during warm up, excellent fuel economy & reduced emissions
  • Easy access, high mounted, high flow 11.5 litre air box features primary & secondary air filters.
    • primary filter is a washable foam design, secondary filter is a wet viscous paper filter
    • no tools, clip-style air box lid for easy access
    • air box & ducting are designed to reduce intake noise
    • no tools required air box & duct work drains
  • Yamaha’s industry leading “Ultramatic” CVT (fully automatic) transmission with reverse & downhill engine braking.
    • dual range, high – low transmission with reverse. Low range offers more “grunt” for towing or hauling heavy loads or when tackling technical terrain.
    • CVT automatically selects the optimum transmission ratio, meaning you are always in the right “gear”
    • Ultramatic design offers controllable, confidence inspiring downhill engine braking
    • engine braking also reduces brake wear & servicing
    • Ultramatic design features a special centrifugal clutch which keeps constant tension on the V-belt to reduce belt wear since the belt does not slip as the clutches engage
    • high mounted belt cooling ducts help prevent water ingestion
    • V-belt housing has a “no tools required” drain plug
    • automotive style, gated, 5-postion shifter (high, low, neutral, reverse & park)
  • Super convenient, servo motor controlled, push button On Command 4WD drive system.
    • On Command drive system features 3 modes: 2wd, 4wd limited slip & 4wd differential lock
    • On Command drive system lets you select the best mode for the conditions… not the machine
    • 4wd differential lock provides power to all 4 wheels for maximum traction and “bite”
  • Hi-low- reverse transmission features helical cut gears.
    • helical cut gears reduce mechanical noise & provide smooth, easy shifting
    • transfer case style transmission (separate transfer case bolts to engine)
    • console mounted, automotive style gated shifter (H-L-N-R)
  • Heavy duty front & rear drive shafts & new design front & rear gear cases.
    • single piece front & rear drive shafts
    • ring & pinion gears use a spiral design to reduce noise
    • front & rear CV drive shafts feature heavy duty “Peest” rubber boots to protect the CV joints for extended service life & durability
  • High flow, high efficiency cooling system with recovery tank.
    • high mounted rad & special rad side covers offer maximum rad protection
    • 7 – blade ring type cooling fan for maximum airflow through the rad
    • under hood access panel & drain cut-out built into the rad shroud for easy rad cleaning
    • over heat warning buzzer
  • Quiet, full stainless steel 2 into 1 exhaust system.
    • system features a cleanable spark arrestor to prevent stray sparks from exiting the exhaust
    • 3-way catalyzer & oxygen sensor (closed loop fuel injection) help reduce exhaust emissions
    • stainless steel design helps prevent rusting
  • Maintenance-free transistor controlled ignition (TCI).
    • produces a strong spark for fast starts
    • provides precise ignition timing / mapping for optimum engine performance at all rpms
  • High performance direct ignition coils (ignition coil is built into the spark plug caps).
    • reduces weight & complexity
  • Speed Key (a.k.a.) Valet Key.
    • limits vehicle top speed to 40 km/hr (25 mph) when Speed Key is on
    • under hood key operated system (key is removable to prevent tampering)
  • High output AC magneto.
    • AC magneto produces 600 watts of power for the vehicle & related optional factory accessories

chassis

    • Rugged, compact, round tube steel frame.
      • wheelbase is only 35 mm (1.4″) longer than 2 seater Wolverine for exceptional off road capabilities & a tight turning radius
      • compact design provides nimble, responsive handling & excellent terrain-ability
      • special frame design positions the rear seats slightly higher than the front seats
      • frame mounted 2″ hitch receiver (907 kg / 2000 lb towing capacity)
    • Full length steel under frame skid plates (high impact plastic front plate).
      • underside of unit is fully protected by rugged steel skid plates with recessed fasteners
      • oil drain holes & other access holes in skid plates for easy service-ability
      • skid plates enhances terrain ability by allowing unit to slide more easily over obstacles
    • ROPS roll over protection structure (ANSI / ROHVA-1-2011 standard).
    • Speed sensitive, rack & pinion-type, Electric Power Steering (EPS).
      • significantly reduces steering effort resulting in less rider fatigue & improved rider comfort
      • speed sensitive system; more assist at slow speeds, less assist at higher speeds for optimum control
      • significantly reduces trail feedback through the steering wheel when a wheel strikes an obstacle
      • fully sealed EPS system (electrics & gears) with marine grade connectors
    • Adjustable, independent double wishbone front suspension with front stabilizer bar.
      • KYB oil & nitrogen gas shock with 5-position cam-style preload adjuster
      • 246 mm (9.7″) of front wheel travel
      • front stabilizer bar controls / limits body roll for added confidence & comfort
    • Dual “Wide Arc” style front A-arms.
      • “Wide Arc” design increases ground clearance in the centre of the machine
      • 273 mm (10.7″) of ground clearance
      • heavy duty plastic CV boot guards
    • Adjustable, independent double wishbone rear suspension with rear stabilizer bar & self leveling rear shocks.
      • Sachs self leveling “Nivomat” nitrogen charged shocks with dual rate springs
      • self leveling shocks help provide consistent ride comfort & maintains wheel travel even when the unit is loaded (people & cargo)
      • stabilizer bar controls / limits body roll for added rider confidence & comfort
      • 221mm (8.7″) of rear wheel travel
      • rugged plastic CV boot guards
    • Four-wheel hydraulic disc brakes.
      • dual 207 mm (8.1″) front rotors squeezed by twin piston calipers
      • dual 207 mm (8.1″) rear rotors squeezed by twin piston calipers
      • rear drive shaft mounted 200 mm disc style parking brake with centre console mounted automotive style parking brake lever
    • High-Performance 26″ MAXXIS tires & aluminum die cast mag wheels.
      • tire design enhances steering precision, ride comfort, ground clearance & traction
      • rugged die cast aluminum wheels
    • 35 litre fuel tank.
      • low fuel warning indicator light in multi-function meter
      • Evap control system helps to prevent raw fuel vapours from entering the atmosphere
    • Easy to read, fully digital LCD multi-function meter assembly.
      • functions include: speedometer, odometer, dual trip meters, fuel gauge, hour meter, clock, voltage display, On Command mode status, transmission gear indicator, Speed Key mode & various warning lights including low battery, temperature warning & more
    • Automotive style dashboard.
      • dashboard includes: On-Command switch, ignition switch, 12 volt DC outlet ( 10A / 120W); glovebox & blank accessory plugs for additional accessories
      • rear seating area also has 12 volt DC outlet (10A / 120W)
    • Adjustable tilt steering wheel & driver’s seat.
      • 12 degrees of tilt steering wheel adjustability (no tools req’d)
      • infinite adjustability within the 12 degrees of movement
      • quick adjust driver’s seat provides 100 mm (3.9″) of movement with 8 pre-set positions of fore-aft adjustability (no tools required)
      • high grip, textured front & rear floor surface
    • Roomy 4-person seating with 3-point seat belts & passenger hand holds.
      • contoured high back bucket seats (4) provide all day riding comfort
      • stadium style rear seats are 100 mm (3.9″) higher than front seats for excellent passenger sightlines
      • quick adjust driver’s seat provides 100 mm (3.9″) or 8 pre-set positions of fore-aft movement (no tools required)
      • high grip, textured front & rear floor surface
      • adjustable front passenger hand hold & rear passenger hand holds (non-adjustable) for additional passenger security, confidence & comfort
      • easy to adjust, 3-point seat belts for all
      • dashboard mounted seat belt & helmet reminder / warning lights
    • Colour matched, roto-molded, plastic doors & special shoulder bolsters.
      • doors provide added security & comfort for driver & passengers
      • doors helps reduce mud & water splash from entering the cockpit
      • shoulder bolsters help ensure driver & passengers stay inside the vehicle in the event of a roll over
    • Centre console storage & drink holders.
      • centre console storage compartment (under centre console arm rest)
      • glove box storage compartment
      • dual centre console mounted drink holders
      • 4-rear console drink holders
    • Super versatile, polyethylene, convertible cargo bed.
      • 2 sizes of cargo bed are available depending on seating arrangement
      • with 4 seats in place the cargo bed measures 220 mm (8.7″) L x 1100 mm (43.3″) W X 330 mm (13″) H & can hold 71 kg (158 lb) of cargo
      • folding down the convertible rear seats (leaving 2 front seats only) the cargo bed measures 900 mm (35.4″) L x 850 mm (33.5″) W X 300 mm (11.8″) H & can hold 272 kg (600 lbs.)
      • rear seats can be folded without the use of tools
      • 8 steel tie down points in the full size bed; 4 points in the smaller bed configuration
      • single lever tailgate opener

Note:

    • regardless of configuration cargo bed does not dump
  • LED Lighting.
    • dual LED headlights
    • dual LED tail lights with brake light function
  • Heavy duty, 2″ receiver style trailer hitch mount.
    • towing capacity is 907 kg (2,000 lbs.)
    • maximum torque weight is 50 kg (110 lb)
  • Aggressive styling with front & rear over fenders.
    • injection-molded body components resist damage
    • slant low nose design provides excellent visibility of the terrain ahead
    • stylish front & rear over fenders reduce splash
  • Low maintenance, sealed battery (battery should be charged during extended storage).
    • convenient under hood location for protection & accessibility
  • All Wolverine X4s have been designed with accessory installation in mind.
    • sun top / roof mounts
    • cab enclosure (windshield, washer fluid, windshield wipers, dome light, etc.) mounts
    • radio mount
    • 2nd battery kit ready

Details

  • Single lever tailgate with dual lanyards to support the gate when open
  • Marine grade waterproof connectors throughout the vehicle
  • Front & rear floor drains with rubber drain covers
  • Dual 12 volt DC outlets (10A / 125 watt each) in front & rear seating areas
  • Under-hood Yamaha diagnostic tool connector (YDT tool performs many functions & saves time & money when diagnosing issues. Plus YDT can also store service history too)

Want More Information?
Contact Us Below.

Name

Email Address

Your Message