2022 ABD Boats 3095 Custom | Port Boat House

1-877-283-BOAT

Port Alberni • Tofino

ABD Boats
2022 ABD Boats 3095 Custom

Description

ABD Boats custom build coming Spring 2022.

ABD Sport 3095 Offshore Specifications

Boat Length, 30′- 0″
Length OA 32′-6″
Beam 9′-6″
Headroom, 6′-8″
Dry Weight 7500 lbs.
Fuel 710 Liters (190 USG)
Fresh Water 100 Liters (27 USG)

Warranty
Lifetime limited warranty on the aluminum structure to the original Owner
One Year warranty on equipment supplied by the builder to the original Owner.

Hull Features

Bottom Plate, 1/4″ Marine Grade 5086 aluminum plate
Side Shell, 3/16″ Marine Grade 5086 aluminum plate
Decks, 3/16″ & 5/32″ Marine Grade 5086 aluminum plate
Cabin, 5/32″ Marine Grade 5086 aluminum plate
Hull Framing, 3/16″ & 1/4″ Marine Grade 5086 aluminum plate

Self-bailing Cockpit
Transom door
Insulated transom fish locker
Two insulated cockpit deck fish lockers with discharge pumps.
Aft station electric steering and controls.
Cockpit side storage trays.
Rod holders
Railings: Boarding Rails, Cockpit Rails, Cabin top rails, Bow railings.
Anchor rode self draining locker.
Three watertight pumpable hull compartments and with bilge alarms.
Aluminum mast
Fully welded hull guards
Six mooring cleats
Simulated teak decking.
Navigation and flood lights.
Trailer tie downs
Wash down pump in cockpit area.
Changeable sacrificial anodes

Interior Features

Insulated accommodation
Simulated teak decking
Weather tight sliding door
Aluminum framed sliding windows on both sides of the cabin.
Aluminum framed exterior windows
V Berth, upholstered surfaces and mattress
V Berth opening deck hatch
Main cabin ceiling, upholstered headliner with led lighting and grab rails.
Main cabin vertical surfaces, maple wood grain finish with upholstered accents.
Settee table, wood grain with recessed cup holders.
Seating, one captain and two passenger shockwave suspension seating.
Settee folds down to make a 40″ wide berth.
Settee upholstered cushions to match helm and passenger seating.
Cabinets and drawers, high quality solid wood maple finish.
Stainless steel sink and faucets
Storage compartments under cabin floor and seating.
Stand up head with sink.
Two USB Outlets

Equipment

Three 1000 gph bilge pumps
High pressure wash down pump
Under deck fish tank discharge pumps.
Electric horn
Heavy duty pantographic windshield wipers
Diesel heater, defrost and cook top
Stainless 3.0 cubic foot DC fridge with freezer shelf
Fuel gauge and fresh water gauge
10 gallon monitorable holding tank, flush toilet, macerator pump and deck side pump out
Anchor and Anchor windlass
Led interior and exterior lighting.
Carbon monoxide detector

Design

The ABD 3095 hull and cabin is built entirely from 5086 H116 aluminum which is a superior alloy to 5052.
5086 has a much higher strength, better corrosive propertied, and less prone to scratching and denting.
The hull is both longitudinally and transversely closely framed with a 1/2″ keel and stem bar offering
superb strength and quiet operation.

Hull and Cabin are insulated for sound dampening and climate control

About ABD Boats

ABD Boats was started by Burton Drody and Alan Dawson in 1987 and is still based out of their first North Vancouver Location.
Burton and Alan got their start in the industry by building jet powered seine skiffs and gill netters for Alaska. After getting some experience with these
small craft they then moved on to build 5 seiners for the BC fishery. ABD then turned their attention to the yacht market, building a 72′, 80′, 90′
and a 120′ trawler style yacht as well as a 63′ sleek yacht with a top speed of 45 knots.

ABD has also built numerous smaller commercial vessels during their 34 years in operations. These consist of vessels like water taxies, whale watching vessels ranging
from 20′ to 70′ and in recent years the construction of two 110ft aluminum fish packers, two 24m high speed
aluminum whale watching catamarans and five steel ship docking tugs, all for local industries.

ABD takes pride in using only premium grade aluminum alloys, 5086 and 5083. These alloys render higher
strength, better corrosive properties and have a much harder durable surface. This is one among many of the reasons
why ABD has earned their solid reputation for building high quality boats.

Technical Specs

Beam 9'-6"

Pricing

Email Sales at sales@portboathouse.com for pricing details

Sales & Service Advantage

We don’t just sell boats. We sell knowhow. From our factory certified Yamaha mechanics to the staff in our parts warehouse, everyone at Port Boat House is dedicated to giving you the expertise and the answers you need to get the best from your boat.

Contact Us

We’re always available to help with your boating needs. Come in to see us, or email us at sales@portboathouse.com.

Contact Us